PRODUCTS
- HYDRAULIC
- Hydraulic Hose
- Hydraulic Fittings
- Ferrule
- American SAE O-ring Seal
- American NPT Male
- American ORFS Flat Seal
- American NPSM 60° Cone Seal
- American JIC 74° Cone Seal
- American SAE 90° Cone Seal
- American SAE Flange
- BSPT Male
- British BSP Flat Seal
- British BSP Multiseal
- British BSP 60° Cone Seal
- Metric Flat Seal
- Metric Multiseal
- Metric 24° Cone O-ring Seal
- Metric 60° Cone Seal
- Metric 74° Cone Seal
- Metric Standpipe
- JIS Metric 60° Cone Seal
- JIS GAS 60° Cone Seal
- JIS Flange
- Banjo and Staplelok
- Reusable Hose Fitting
- Adapter
- Hose Machine and Equipment
- Adapter
- INDUSTRIAL HOSE
- FUEL DISPENSER PARTS
- PNEUMATIC COMPONENT
- PLASTIC PRODUCTS
- AUTOMOTIVE PARTS
- PROFESSIONAL GAS STATION EQUIPMENT
NEWS
- Tianjin BST Import and Export Co., Ltd.
- What are the precautions for the safe use of high pressure hoses?
CONTACT US
BST-LPG 3/4'' REUSABLE STAINLESS STEEL BREAKAWAY CONNECTOR
BST-LPG 3/4'' REUSABLE STAINLESS STEEL BREAKAWAY CONNECTOR
Female thread 3/4'' BSPP
Material stainless steel and brass
Flow rate5-50 L/min
Working pressure 0.25Mpa
Temperature -40℃~+85℃
The LPG reusable breakaway connector is mounted at the distributor at the beginning of the LPG pressing hose to the vehicle. In the event of a snake's breaking as a result of the vehicle's movement with a hose attached, the zone connector is disconnected. At the same time. gas flow is blocked. After thoroughly checking both parts of the connector if they do not have damage. the connector can be re-connected and checked its operation and tightness.
BST-LPG 3/4'' REUSABLE STAINLESS STEEL BREAKAWAY CONNECTOR
BST-LPG 3/4'' REUSABLE STAINLESS STEEL BREAKAWAY CONNECTOR
Female thread 3/4'' BSPP
Material stainless steel and brass
Flow rate5-50 L/min
Working pressure 0.25Mpa
Temperature -40℃~+85℃
The LPG reusable breakaway connector is mounted at the distributor at the beginning of the LPG pressing hose to the vehicle. In the event of a snake's breaking as a result of the vehicle's movement with a hose attached, the zone connector is disconnected. At the same time. gas flow is blocked. After thoroughly checking both parts of the connector if they do not have damage. the connector can be re-connected and checked its operation and tightness.
